MaxColor Transmitters and Receivers create a Motion-JPEG video stream viewable over the network - without audio - at up to 30 fps.
http://[mc-ip]:8080/?action=stream
Replace [mc-ip]
with the IP address of the Receiver or Transmitter to view.
The Motion-JPEG video stream has these settings by default:
The command below applies the default settings listed above.
astparam s ss_stream_option 640,360,30,5000,0,10;astparam save;reboot
The default settings can be modified to alter the M-JPEG stream by sending the command via telnet or through the CLI of the Transmitter/Receiver with altered values. Any changes should be tested to confirm they do not interfere with HDMI video.
astparam s ss_stream_option $WIDTH,$HEIGHT,$FPS,5000,0,10;astparam save;reboot
Parameter | Default | Maximum Value |
---|---|---|
$WIDTH | 640 | 1280 |
$HEIGHT | 360 | 720 |
$FPS | 30 | 30 |
Examples:
astparam s ss_stream_option 1280,720,30,5000,0,10;astparam save;reboot
astparam s ss_stream_option 320,180,10,5000,0,10;astparam save;reboot