You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Thanksgiving: Support will not be available Thursday November 28th through Sunday December 1st. We will re-open Monday December 2nd.
Home > Control Systems > Enado > [JADConfig] Enado Configuration for Just Add Power
[JADConfig] Enado Configuration for Just Add Power
print icon

Overview

Enado is a processor-based control system that produces a simple-to-use webUI, accessible from any network device. Control can be accessed by any device on the network, or expanded to allow external control from anywhere in the world!

Please go to www.enado.com for more information on how to get started.

For more technical information, go to www.myenado.com.


Requirements

  1. Cisco or Luxul switch is the center of the HDMI matrix
  2. System is configured with JADConfig
    • As this driver is not built by Just Add Power, please confirm with the manufacturer that they support your switch model in their driver.
  3. The JADConfig Report File is available for upload to the controller
  4. Enado controller connected to the data network

Enado Manual


Drivers

Most drivers for Enado can be found in the library on the controller webUI, or at www.myenado.com.

Just Add Power drivers for Enado can be found in the Enado Driver Knowledge Base Article.

scroll to top icon