You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close

[JADConfig] URC Driver


Overview

This driver controls:

  • HDMI matrix switching for up to 32 inputs and 32 outputs
    • Group switching
    • Swap Outputs
    • Move Output
    • Recall Input
  • Standard video wall with rotation
  • Tiling Transmitter layout
  • On-screen display
  • Analog audio input/output
  • Endpoint devices through RS232/IR/CEC

For new 3G or MaxColor systems, we recommend configuring the system with AMP VLAN. A URC driver for an AMP VLAN system can be found here.


Requirements

  1. Just Add Power 3G System
  2. Luxul managed Ethernet switch supported by JADConfig
  3. Setup switch and devices using JADConfig
  4. justOS firmware B1.2.1 or later on Just Add Power devices. JADConfig will perform this update during setup.
  5. Static Route (Option 1 or Option 2) for all functions beyond HDMI matrix switching
  6. Total Control 2.0 & Accelerator 2.0

If these Requirements cannot be met, the Legacy driver may be a possibility.


Download

Get started at www.urcportal.com

Navigate to Total Control 2.0 Dealer Resources, then Two-Way Modules to download the driver and manual.


Legacy

Download Legacy driver (from URC website, requires login)

If the Requirements listed above cannot be met, the Legacy driver has these requirements:

  1. Just Add Power 2G or 3G System
  2. Luxul managed Ethernet switch supported by JADConfig
  3. Setup switch and devices using JADConfig
  4. Total Control & Accelerator

The Legacy driver is able to control:

  • HDMI matrix switching for up to 32 inputs and 32 outputs
  • Standard video wall
  • 71
  • 28-Nov-2022
  • 9446 Views