You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Support will close at 3:00 pm Eastern on December 20th. Limited support will be available from 8:00 am to 6:00 pm on December 23rd, 26th, 27th, and 30th. Support will be closed December 24th, 25th, and 31st as well as New Year's Day.

Happy Holidays!
announcement close button
Home > Image Play > Image Push: Customize a Receiver Background Image
Image Push: Customize a Receiver Background Image
print icon
Apr 17, 2024

Overview

Image Push gives a Just Add Power Receiver - any model of 2G, 2GΩ/3G, 3G, and MaxColor - the ability to display a custom image on the Diagnostic Screen when no Transmitter video is showing. This feature is designed to allow an installer to further customize a site by adding the installer's logo, the customer's logo, or another image.

Image Push feature was introduced into the 2G/2G+ platform with a free firmware update in 2014, and is included in all releases afterwards. Image Push can be applied to any Just Add Power 2G device built since 2010 by updating the firmware and uploading an image.

As of firmware B2.0.0, Image Push can be uploaded to any 3G device through the web interface. All versions of MaxColor firmware can upload Image Push through the webUI.

Requirements

3G B2.x.x firmware

  • All file formats and sizes are accepted
  • The image will be scaled to 1280x720p
  • We recommend that the image should NOT have a white background, as that is the color of the diagnostic text.

MaxColor

  • All file formats and sizes are accepted
  • The image will be scaled to 1920x1080p
  • We recommend that the image should NOT have a light-blue background, as that is the color of the diagnostic text.

3G Ultra and MaxColor Instructions

To update the background image:

  1. Open the webUI of the Receiver
  2. Go to the Video tab and ImagePush Update card
  3. Select Choose File and navigate to the image
  4. Choose whether to push the image to This Receiver (the webUI that is open) or All Receivers (every Receiver in the system)
  5. Click Upload
  6. Done!
  7. If you need to revert back to the default image, click Default and confirm.

Adjustments

On devices in a 3G System, the display resolution and the diagnostic text of Image Push can be adjusted. Please see the Video section of the 3G Device Settings article listed as Debug Text and Debug Screen Resolution more information.

Legacy Patching Program

For all A5.x.x, A6.x.x, and B1.x.x firmwares, updating the background image can be done through a special patching program.
Link below includes the Windows-only program that creates the file to be uploaded to the Receiver, along with instructions.

Legacy Instructions

  1. Run J+PBackgroundPatch.exe
  2. Follow the prompt to choose the firmware you would like to create the Background Image for.
    • Works with the 2G System and 3G System
    • Choose the firmware file for the Receiver model that the image will be loaded onto.
    • Earliest capable firmware: A5.13d
  3. Follow the prompt to choose the image file.
    • Image format must be .jpg
    • Maximum file size is 1MB
    • Maximum image resolution is 1920x1080
  4. The file created by the program is named JAP-2G-RX-background-patch.bin and is located in the same folder as the program.
    • The name is the same regardless of the firmware chosen.
    • We recommend renaming the file afterwards to reflect the Receiver model that the file is compatible with.
    • Note: On Virtual Machines, the file could appear in another folder.

Download Logo Backgrounds

Default background logo for Just Add Power devices can be downloaded in the link below. Also contains a 180-degree version of the logo. Use these files to revert to the default background or to test background uploading.

close button
scroll to top icon