Introduction
Models that are labeled as 2GΩ/3G are capable of 1080p resolution maximum and are compatible with 3G Ultra devices. "Transmitter" describes the source-side encoding device and there are various models meant for different requirements at the source location. All models are compatible with each other so they can be used in the same installation. Use this article to help with choosing the model that best serves the video, audio, and hardware needs of each source location.
2GΩ/3G units can also be expansion or replacement units for legacy 2G systems.
If you are planning a 4K30 project, see the 3G Ultra Transmitter Comparison article instead.
Features of All Models
Feature | Description |
---|---|
1080p Video | Up to 1920x1200 resolution support |
Instant-Seamless Switching | Switch from one source to another without the display realizing the source changed. |
Image Pull | Snapshot an image of video for display on any network-accessible device. |
Endpoint control | Control sources and displays with IR, RS232, and CEC. |
Baseline Model
Model Number
Model Name
- 2GΩ/3G POE Transmitter
Ports
- HDMI In
- Gigabit network with POE
- RS232
- Power
Features
- All audio formats supported. Audio is passed-through to the display endpoint with no modification.
Other Models
The baseline model - 705POE - is powered by POE and has 1080p video, pass-through any audio, instant-seamless switching, RS232/IR/CEC control, and image pull. The models below should be specified if additional features not present on the 705POE are needed.
Model | Variation from Baseline Model | Example |
---|---|---|
715POE | Gains: 1) HDMI loopout 2) Stereo Out port 3) USB port |
Add a source that needs USB, local HDMI loopout, or Stereo Out port |
767DSS | Adds: 1) Dante Sound System compabitility - LPCM audio 2) HDMI loopout Removes: 1) Audio support for formats other than LPCM 2) RS232 port |
Mix video distribution with Dante Sound System 1) Inject HDMI source into Dante audio system 2) Play Dante audio source through video distribution system |
716VGA | Adds: 1) VGA In port 2) Line In port 3) USB port Removes: 1) HDMI In port |
Add a VGA source to the HDMI distribution system |
725POE | Gains: 1) SDI In port 2) HDMI loopout 3) Stereo Out port Removes: 1) HDMI In port |
Add an SDI source to the HDMI distribution system |
726TVI | Gains: 1) TVI In port 2) HDMI loopout 3) USB port Removes: 1) HDMI In port |
Add a TVI source to the HDMI distribution system |
*IR control requires use of VBS-HDMI-IRD IR Dongle.