MC-QX Spec Sheet: MaxColor Tiling and Warping Transmitter
Model Number MC-QX Go to Product Page Compatibility All MaxColor devices are compatible with each other. For information on how to bridge MaxColor devices with an existing 3G Ultra system, please see this article .
12-Dec-2024
[ST1 Transceiver] Set Receiver or Transmitter Mode
Overview The 3G Ultra ST1 Transceiver is an audio-only endpoint in a 3G Ultra AV over IP system. It can be installed either as a Transmitter - connected to an audio player - or as a Receiver - connected to a speaker or headphones. Setting Transmitter Mode or Receiver Mode can be done before or after running configu…
24-Jun-2024
MC-TX2 Spec Sheet: MaxColor Series 2 Transmitter
Model Number MC-TX2 Go to Product Page Compatibility All MaxColor devices are compatible with each other. For information on how to bridge MaxColor devices with an existing 3G Ultra system, please see this article .
22-Feb-2024
749KVM Spec Sheet: 3G+ KVM Rackmount Transmitter
Model Number VBS-HDIP-749KVM This product is discontinued. The replacement product is VBS-HDIP-749AVP. Go to 749AVP Product Page Compatibility 3G products are compatible with: * All 2GΩ/3G products in 3G Mode * All other 3G products in 3G Mode
15-Aug-2024
718KVM Spec Sheet: 3G+ KVM Transmitter
Model Number VBS-HDIP-718KVM Go to Product Page Compatibility 3G products are compatible with: * All 2GΩ/3G products in 3G Mode * All other 3G products in 3G Mode
22-Feb-2024
MC-TX1 Spec Sheet: MaxColor Series 1 Transmitter
Model Number MC-TX1 Go to Product Page Compatibility All MaxColor devices are compatible with each other. For information on how to bridge MaxColor devices with an existing 3G Ultra system, please see this article .
04-Dec-2024
717WP2 erroneously has 718WP4 firmware
Most Just Add Power devices will not allow an incompatible firmware to be loaded onto them. Unfortunately, the wallplate devices - 717WP2 and 718WP4 - are close enough that their firmware files can be loaded on each other. * 717WP2: 2-gang Wallplate Transmitter * 718WP4: 4-gang Wallplate Transmitter If you find yo…
24-Jun-2024
[3G Ultra] [709P2P] Power Supply Specifications
The VBS-HDIP-709P2P Point-to-Point Transmitter requires more power than a typical 3G device, and does not ship with a power supply included. Each Just Add Power unit requires between 8-10 Watts of power. A 50-watt power supply* will be sufficient to power a single 709P2P and 4 POE Receivers connected inline. Power s…
26-Jun-2024
2G Omega Transmitter Comparison
* Introduction * Features of All Models * Baseline Model * Other Models Introduction Models that are labeled as 2GΩ/3G are capable of 1080p resolution maximum and are compatible with 3G Ultra devices. "Transmitter" describes the source-side encoding device and there are various models meant for different req…
14-Apr-2022
