Spec Sheet - MC-TX3 - 4K60 Encoder w/ AES67 & USB-C
Model Number MC-TX3 Product Page See product page for device information and specifications. Go to Product Page
20-Feb-2025
Spec Sheet - MC-QX - 4K60 Encoder w/ Video Tiling & 360° Video Rotation
Model Number MC-QX Product Page See product page for device information and specifications. Go to Product Page
20-Feb-2025
ST1 Audio Encoder / Decoder - Set Encoder or Decoder Mode
Overview The ST1 Audio Encoder / Decoder is an audio-only device compatible with all Omega, Ultra, and MaxColor series AV over IP Systems. It can be installed either as an Encoder - connected to an audio player - or as a Decoder - connected to a speaker or headphones. Setting Encoder Mode or Decoder Mode can be don…
03-Mar-2025
Instructions - Reconfigure an Established Omega/Ultra JADConfig Single-Switch System with AMP
Overview JADConfig - released in 2011 and deprecated in 2022 - has assisted countless Installers with configuring Just Add Power systems. Starting with a group of unconfigured hardware, an Installer can build a fully-functional Just Add Power AV over IP matrix switching system in about 30 minutes. JADConfig systems…
13-May-2025
ST1 Audio Encoder / Decoder - Audio Distribution Examples
Overview The Just Add Power Sound Encoder/Decoder - model ST1 - is capable of sending or receiving stereo audio from a Just Add Power system. As a Transceiver, you begin by choosing whether it will act as a Encoder or Decoder - an input or an output - and build the system accordingly. Audio Capabilities * Stereo …
03-Mar-2025
Instructions - IPv4 Address Table for AMP Standardized Systems
Overview Advanced Matrix Programmer uses a unique IP Scheme for all Just Add Power Series devices being setup using the software. Just Add Power Network IP: 172.27.0.0 Just Add Power Subnet Mask: Class B | 255.255.0.0 | /16 The specific subnet does not affect the system as long as 2 rules are followed: * Each …
06-May-2025
