⚠️ JADConfig will reach End of Support on January 1, 2027. View the official notice! ⚠️
Add New Devices On-site to an Established System with AMP Alternate Configuration
Overview Advanced Matrix Programmer (AMP) can add new Omega Series, Ultra Series, or MaxColor Series Encoders and Decoders to an established Alternate Configuration system while at the jobsite. AMP communicates with one established device to retrieve the system settings and existing device assignments. The new devi…
27-Aug-2026
Configure New Devices Off-site for an Established System with AMP Alternate Configuration
Overview Advanced Matrix Programmer (AMP) can configure new Omega Series, Ultra Series, or MaxColor Series Encoders and Decoders at an office before they are added to an established Alternate Configuration system at the jobsite. Because AMP cannot communicate with the established system during an off-site configura…
21-Aug-2026
How to Locate a Device IP Address (Omega, Ultra, and MaxColor Series)
Overview Before accessing a Just Add Power device through the webUI, Telnet, or API, you must first identify its IP address. This article explains several methods for locating the IP address of Omega, Ultra, and MaxColor Series devices. The best method depends on whether the device is part of an existing AMP-standa…
04-Sep-2026
Troubleshooting Device Discovery Issues While Using JADConfig
Legacy For existing JADConfig systems only. Overview When using JADConfig to configure your Just Add Power system, it's crucial that all devices are properly detected during the discovery process. If some or all devices are not discovered, follow these steps to ensure a smooth setup. Pre-Discovery Checkl…
13-Feb-2026
Disable Network Adapters in Windows
There are some cases when running JADConfig requires that the local network be bypassed entirely and to connect the laptop directly into port 1 of the Just Add Power switch in order to fully succeed (such as device discovery issues). A common mistake is assuming that a "disconnected" adapter, or an adapter in "a…
04-Jan-2022
Build a New System on an Existing Network with AMP Alternate Configuration
Overview Advanced Matrix Programmer (AMP) can configure a new Omega Series, Ultra Series, or MaxColor Series system on an existing managed network using Alternate Configuration . In an Alternate Configuration, AMP configures only the Just Add Power Encoders and Decoders. The Installer or network administrator is r…
18-Aug-2026
