There are some cases when running our Configuration Software, in certain circumstances require that the local network be bypassed entirely and to **connect the laptop directly into the Just Add Power switch** in order to fully succeed. * AMP VLAN: Last Port of First Switch. * AMP Multicast: Any Port within the Ded...
## Command Executed from a Windows Command Prompt "Run as Administrator" route add [destination network] mask [netmask] [switch ip] metric 2 ### Examples 1. For a J+P network of 10.0.0.0, subnet mask 255.0.0.0 and switch IP 192.168.0.254 route add 10.0.0.0 mask 255.0.0.0 192.168.0.254 m...
* [Overview][1] * [How to Enable][2] * [How to Use][3] * * * ## Overview Use the _**Windows Telnet Client**_ for text communication to a switch or Just Add Power device. ![Successful connection to destination device][4] If your computer does not yet have the _**Windows Telnet Client**_ enabled, you will get ...
There are some cases when running JADConfig requires that the local network be bypassed entirely and to **connect the laptop directly into port 1 of the Just Add Power switch** in order to fully succeed (such as device discovery issues). A common mistake is assuming that a "disconnected" adapter, or an adapter in "...