Stacking vs Trunking
* Overview * Stacking How It Works Switch Connections Port Identification Replacement * Trunking How It Works Switch Connections Port Identification Replacement Overview When building a Just Add Power audio/video network with more than one switch, these requirements must be met: * Audio/vide…
20-Sep-2022
Network Connection Through Receiver Port
* Overview * Capabilities * Setup Overview In situations where only a single network wire is available from the rack location to a display location, the same network cable that carries audio/video traffic to a Just Add Power Receiver can be used to carry data traffic to some devices at the display location. Addit…
04-Jan-2022
Enabling Windows Telnet
* Overview * How to Enable * How to Use Overview Use the Windows Telnet Client for text communication to a switch or Just Add Power device. If your computer does not yet have the Windows Telnet Client enabled, you will get a warning message when attempting to launch Telnet from the Windows Command Prompt tha…
04-Jan-2022
Docklight Scripting - RS232/IR/CEC/Telnet Advanced Troubleshooting Tool
Docklight Scripting is a program that allows the user to build a string of ASCII or HEX characters, and then send those commands to a specific IP address and port number (TCP Socket), and is a useful tool when troubleshooting a variety of advanced features in the Just Add Power 2G and 3G platforms external to the con…
05-Sep-2024
Adding a Static Route to Windows
Command Executed from a Windows Command Prompt "Run as Administrator" route add [destination network] mask [netmask] [switch ip] metric 2 Examples 1. For a J+P network of 10.0.0.0, subnet mask 255.0.0.0 and switch IP 192.168.0.254 route add 10.0.0.0 mask 255.0.0.0 192.168.0.254 metric 2 2. For a J+P network of …
13-Mar-2023
Adding a Static Route to macOS
* Overview * Command * Examples Overview Whether setting up or troubleshooting a system, there are some situations where adding a static route to the computer's internal routing table is necessary: * If there is not a static route already added to the network router. Perhaps because one is not needed for the …
13-Mar-2023
