You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Thanksgiving: Support will not be available Thursday November 28th through Sunday December 1st. We will re-open Monday December 2nd.

Showing articles from 4K60 tag

[MaxColor] Supported Video Resolutions and Timings

* Overview * Supported Timings [FHD] Full High Definition [FHD] /w Incorrect Polarity [FHD] /w High Refresh Rate [FHD] 3D Frame Packing [DTV/STB] CEA-861-D [DTV/STB] CEA-861-D /w High Refresh Rate [UWHD] Ultra-Wide High Definition [UHD] Ultra High Definition [4k] Full High Definition [VESA…

[MaxColor] Receiver Scaler Settings

Overview All MaxColor Receivers have a built-in video scaler. This enables a source to be set to the maximum resolution even when all displays may not support that resolution. The Receiver will adjust the output resolution so that the display can properly play the video. Standard Resolutions MaxColor Receivers com…

MaxColor Project Planning Guide

* Introduction * Part 1: Choose Receivers & Transmitters * Part 2: Consider Accessory Parts * Part 3: Choose a System * Part 4: Control System & Drivers * Contact for Planning Assistance Introduction The Just Add Power MaxColor system is a 4K60 , 36-bit color , 4:4:4 color format HDMI over IP distribution …

DirecTV 4K Settings & EDID

* Overview Firmware B2.x.x * Set Transmitter EDID Overview The standard EDID on a 3G Just Add Power Transmitter does not currently display a 4K DirecTV at it's native resolution settings. To get an DirecTV to output 4K video, the default EDID must be modified. Firmware B2.x.x The Default EDID in firmware B2.…

scroll to top icon