[AES67] Specifications & Instructions
Overview AES67 is an audio-over-IP standard used by many companies for transmitting audio signals over a network. Unlike proprietary protocols, AES67 is managed by the Audio Engineering Society (AES), a professional organization for sound engineers and scientists. This open standard allows for interoperability bet…
23-Oct-2024
[ST1 Transceiver] Set Receiver or Transmitter Mode
Overview The 3G Ultra ST1 Transceiver is an audio-only endpoint in a 3G Ultra AV over IP system. It can be installed either as a Transmitter - connected to an audio player - or as a Receiver - connected to a speaker or headphones. Setting Transmitter Mode or Receiver Mode can be done before or after running configu…
24-Jun-2024
[EDID] Recommended AppleTV EDIDs
* Overview * 1080p Stereo EDID * 4k30 Stereo EDID Overview The AppleTV OS17 update added support for 44.1kHz sample rate. This causes issues. The EDIDs below remove Just Add Power support for 44.1kHz sample rate, preventing an HDMI source from outputting at that sample rate. The symptom of audio skipping - audio…
04-Oct-2024
[MaxColor] Audio Return Channel (ARC) Pass-through with MaxColor Series 2 Transmitters and Receivers
Overview The MaxColor Series 2 Transmitter and Series 2 Receiver - MC-TX2 and MC-RX2 - add support for Audio Return Channel (ARC) when used in a point-to-point connection between a display and AVR that both support ARC. MaxColor Series 2 devices support ARC. They do NOT support eARC. MaxColor Series 2 devices do N…
24-Jun-2024
Check Detected Audio Format
Firmware A6.5.5 introduced the ability to check the currently detected audio format on both transmitters and receivers. The following commands may be sent via telnet to determine the current audio format: For Transmitters: cat /sys/devices/platform/1500_i2s/input_audio_info For Receivers: cat /sys/devices/platfor…
02-Feb-2023
[3G Ultra] [Wallplate] Input Audio Selection Management
Overview The 717WP2 has two ways to input audio: HDMI and Line In. Audio can only play back from one input at a time. Settings There are five options for how to choose the audio source transmitted over the network. To select one of these options, log into the web interface of the 717WP2 and apply the desired comma…
25-Jun-2024
[ST1 Transceiver] Audio Distribution Examples
Overview The Just Add Power Sound Transceiver - model ST1 - is capable of sending or receiving stereo audio from a Just Add Power system. As a Transceiver, you begin by choosing whether it will act as a Transmitter or Receiver - an input or an output - and build the system accordingly. Audio Capabilities * Stereo…
24-Jun-2024
ST1 Spec Sheet: Sound Transceiver
Model Number VBS-HDIP-ST1 Go to Product Page Compatibility 3G products are compatible with: * All 2GΩ/3G products in 3G Mode * All other 3G products in 3G Mode
22-Feb-2024
[2G] Supported Audio Formats
A comprehensive analysis of audio format testing through the 2G/2G+ devices is included in the spreadsheet attached to this email. The 2G/2G+ devices support 2-channel PCM audio, and compressed multichannel audio formats up to DTS 5.1, THX 7.1, and Dolby Digital Plus 7.1. Lossless audio formats such as DTS-HD Mas…
26-Jun-2024
