Overview The 3G Ultra ST1 Transceiver is an audio-only endpoint in a 3G Ultra AV over IP system. It can be installed either as a Transmitter - connected to an audio player - or as a Receiver - connected to a speaker or headphones. Setting Transmitter Mode or Receiver Mode can be done before or after running configu…
Model Number MC-RX2 Product Page See product page for device information and specifications. Go to Product Page
Model Number MC-RX1 Product Page See product page for device information and specifications. Go to Product Page
Overview To send a command to a single device, you can telnet to the device and apply the command. But what if you need to send the same command to multiple Receivers in a system? Then commandallrx.sh is what you need! Syntax commandallrx.sh [command] Functionality * If [command] contains a space character, en…
* Introduction * Features of All Models * Baseline Model * Other Models * Download Data Sheet Introduction Models labeled as 2GΩ/3G are capable of 1080p resolution maximum and are compatible with 3G Ultra devices. "Receiver" describes the display-side decoding device and there are various models meant for d…
Model Number VBS-HDIP-218AVP DISCONTINUED Specifications Please see spec sheet for product features and limitations. Download Spec Sheet Compatible Models This product is no longer in production. Please see product page for compatible models. Go to Product Page
Model Number ST1 Product Page See product page for device information and specifications Go to Product Page
Model Number VBS-HDIP-208POE DISCONTINUED Specifications Please see spec sheet for product features and limitations. Download Spec Sheet Compatible Models This product is no longer in production. Please see product page for compatible models. Go to Product Page
Model Number VBS-HDIP-208A DISCONTINUED Specifications Please see spec sheet for product features and limitations. Download Spec Sheet Compatible Models This product is no longer in production. Please see product page for compatible models. Go to Product Page
VLAN Switching In a VLAN Switching system, the A/V signal is switchport-based. This means that all Receivers connected to the same switch port will always show the same Transmitter. It also means that a port only has the bandwidth of a single A/V signal so the full 1Gbps of the network wire is available to it. No …