-
How to Set Startup Settings (2G Series and 2G Legacy Mode)
Overview Startup settings on a Just Add Power device define how the unit behaves when it powers on. Any changes made to these settings are not applied immediately and will only take effect after the device is rebooted. Many settings are intended for specific installation scenarios and should not be applied as g…
02-Oct-2026
-
CLI Commands (Omega, Ultra, and MaxColor Series)
Overview CLI commands change the live behavior of a Just Add Power device. Commands execute immediately without saving or rebooting, but the resulting changes may not persist through a reboot. This article covers Omega Series, Ultra Series, and MaxColor Series devices running the latest firmware for their series.…
19-Oct-2026
-
Startup Settings (Omega, Ultra, and MaxColor Series)
Overview Startup settings determine how a device behaves after it boots. These settings are stored in non-volatile memory and remain active after the device is power cycled. This article covers Omega Series, Ultra Series, and MaxColor Series devices running the latest firmware for their series. Before using these…
19-Oct-2026
⚠️ JADConfig will reach End of Support on January 1, 2027. View the official notice! ⚠️
