You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Thanksgiving: Support will not be available Thursday November 28th through Sunday December 1st. We will re-open Monday December 2nd.

Showing articles from astparam tag

[3G Ultra] [Wallplate] Settings and Commands

Overview Two types of Wallplate Transmitters are available: * VBS-HDIP-717WP2: 2-gang, HDMI and VGA in, Line-In, Micro USB, Source Dipswitch, POE network * VBS-HDIP-718WP4: 4-gang, HDMI and VGA in, Line-In, Micro USB, Source Dipswitch, POE network, Mic-In, HDMI out, Stereo out, RS232 with null modem Settings are …

Set Web Name

Devices on firmware A5.21d and later have the ability to apply a name to the web interface to distinguish it from other Just Add Power devices in a system. Setup * Log into the web interface of the device and go to the System --> Utilities bar * Alternatively, telnet into the device * Apply the command below, …

[2G Hybrid] Device Settings

Overview Settings on Just Add Power alter the behavior of the device upon start-up. Settings that are changed will not be active immediately; they will be applied upon the next start-up. Many settings should be altered according to the unique situation present in each installation and are not recommended as blanket …

[3G Ultra] Device Settings

Overview The 3G System includes all 2GΩ/3G and 3G devices. Essentially, any device in a black metal casing. Settings on Just Add Power alter the behavior of the device upon start-up. Settings that are changed will not be active immediately; they will be applied upon the next start-up. Many settings should be altere…

scroll to top icon