⚠ JADConfig will reach End of Support on January 1, 2027. View the official notice ⚠
How to Disable Telnet (Omega, Ultra, and MaxColor Series)
Overview The Telnet server can be disabled on any Omega Series, Ultra Series, or MaxColor Series device. Once disabled, the device will no longer accept Telnet connections on TCP port 23 . This setting applies to an individual device. Repeat the procedure on each device where Telnet access must be disabled. Befor…
31-Jul-2026
How to Use On-Screen Display on a Decoder (Omega, Ultra, and MaxColor Series)
Overview On-Screen Display (OSD) allows a Decoder to display text over the current video output. OSD messages can be used for room identification, notifications, troubleshooting, testing, and system automation. This feature is supported on Omega Series , Ultra Series , and MaxColor Series Decoders . Legacy Sy…
15-Jul-2026
Postman - HTTP API Testing and Troubleshooting Tool
* Overview * Download * HTTP API * Firmware * Using Postman GET Commands POST Commands Overview Postman is a program that allows the user to interact with HTTP APIs. When used with Just Add Power, it can send POST and GET requests and display the responses. It is a useful tool when troubleshooting or tes…
11-Jul-2023
Multicast Switching Protocol
Overview Multicast Switching changes the multicast IP address—called a Channel —that a Decoder subscribes to, so it displays the selected Encoder . This enables fast, reliable source switching without rewiring or reconfiguring routes. Channel changes can be triggered by a control system, user interface, or API…
08-Jul-2026
Serial RS232 Troubleshooting
Overview Use this article when serial commands sent through a Just Add Power device do not control the connected source or display, or when expected serial feedback is not received. Serial communication depends on the entire path between the control system and the endpoint device. Troubleshoot the path in order: ne…
31-Jul-2026
Omega & Ultra Series: B3.2.0
Download Download Latest Omega/Ultra Firmware Release Date 2026-01-13 Compatibility * B3.X.X works with all existing control system drivers that use Legacy API commands * B3.X.X does not work with B2.X.X or B1.X.X firmware * B3.X.X does not support 2G devices Release Notes Added * Web UI Network…
19-May-2026
CEC over IP Control (Omega, Ultra, and MaxColor)
Overview CEC (Consumer Electronics Control) is an HDMI feature that allows devices to send control commands over the HDMI cable. In a simple point-to-point setup, this allows a TV remote to control a connected source device. CEC works well when a single source is connected directly to a single display. In an HDMI …
04-Aug-2026
