* Overview * Null Modem Jumper * Receivers MC-RX1 MC-RX2 * Transmitters MC-TX1 MC-TX2 Overview MaxColor Transmitters and Receivers have a null modem jumper on the bottom of the unit that flips the transmit and receive pins on the RS232 port. The nature of RS232 is that there is always a 50% chanc…
* Overview * Direct (TCP:6752) * Passive (Point-to-Point) * API (CLI Access) Overview Just Add Power supports 3 Types of serial management of endpoint devices: * Direct: Commands enter the system via an IP telnet connection to port 6752 of a Transmitter or Receiver. The command passes out of the RS232 port. 2-…
* Overview * Null Modem Jumper * Transmitters 707POE/747POE/705POE 708POE 709P2P 717HIFI 718AVP/749AMP/718KVM/749KVM/715POE * Receivers 508POE/505POE 509POE 518AVP/515POE Overview 3G Transmitters and Receivers have a null modem jumper on the bottom of the unit that flips the transmit and re…
* Overview * Set Serial Mode * Passive * Direct * API Overview Serial over IP describes various methods of passing RS232 commands through a network to Just Add Power Transmitters and Receivers to control endpoint devices - sources or displays. Just Add Power supports 3 modes of serial management of endpoint de…
* Overview * Download * Build a Driver * Setup a Driver Overview RS232 control in URC is best accessed by allowing the Accelerate process to build a user interface automatically. In order to do that through the Just Add Power system, standard RS232 drivers must be converted to RS232 over IP drivers. This change …
The PDF attached to this Knowledge Base article contains the integration notes from Elan g! for use with the Just Add Power 2G/2G+/3G devices. The driver available in the Elan g! software releases versions 6.4.200 and later include support for utilizing the Just Add Power device RS232 ports for end-point control. …
* Overview * Download * Versions * Changes * [Legacy] Licensed Version Overview This driver package provides Matrix Control, Endpoint Control, and Feature Control of a Just Add Power VLAN switching system configured with JADConfig . * Matrix Control - switch any display to watch any source * Endpoint Contro…
* Overview * Type 1 (Dumb Redirection) * Type 2 (Guest Mode) * Type 3 (CLI Access) Overview Just Add Power supports 3 Types of serial management of endpoint devices: * Type 1: Commands enter the system via the RS232 port on a Transmitter. Commands are passed to all Receivers watching that Transmitter. The Rece…