⚠ JADConfig will reach End of Support on January 1, 2027. View the official notice ⚠
Download - URC Total Control 2.0 Endpoint Driver for CEC Control
Overview CEC control in URC is best accessed by allowing the Accelerate process to build a user interface automatically. In order to do that through the Just Add Power system, a CEC driver must be converted to a CEC over IP driver. This change allows the URC processor to send CEC commands to a Just Add Power device …
12-May-2025
Download - URC Total Control 2.0 Endpoint Driver for RS232 Control
Overview RS232 control in URC Accelerator is best implemented by allowing the Accelerate process to automatically build a user interface. To make this possible through a Just Add Power system, standard RS232 drivers must be converted into RS232 over IP drivers. This allows the URC processor to send RS232 comma…
01-Dec-2025
Download - URC Total Control 2.0 Endpoint Driver for IR Control
Overview IR control in URC is best accessed by allowing the Accelerate process to build a user interface automatically. In order to do that through the Just Add Power system, standard IR drivers must be converted to IR over IP drivers. This change causes the URC processor to send IR commands through the network conn…
12-May-2025
Download - URC Total Control 2.0 Matrix Driver for AMP Standardized Systems
Overview URC and Just Add Power have partnered to develop a driver to control a Just Add Power Standardized AMP system . Download Go to URC's website to download the URC Standardized AMP driver * Go to urcportal.com and login * Go to Resources --> Total Control Resources * Scroll down to Two-Way Module…
12-May-2025
