Model Number MC-QX Go to Product Page Compatibility All MaxColor devices are compatible with each other. For information on how to bridge MaxColor devices with an existing 3G Ultra system, please see this article .
Overview Knowing how to check the firmware version of your Just Add Power devices is required when planning to add or replace a device on an already established system. In order to perform most of these steps, you will need a static route active. Follow the link for Instructions on how to set one up on your netwo…
* Release Date * Compatibility * Download * Changes Major Minor Bug Fixes * Known Issues Release Date 2023-07-10 Compatibility * MAX v3.7.4 is fully compatible with all MAX v3.x.x versions * MAX v3.7.4 operates on models: MC-RX1 MC-RX2 MC-TX1 MC-TX2 Download Download Firmware v3.7.4 Ch…
Overview MaxColor devices that support Power Over Ethernet (POE) are classified as IEEE 802.3af devices, meaning they use no more than 12.95 watts. Power Usage POE usage varies depending on the features currently in-use * No live video (TX or RX) = 3-4 watts * Live video under standard conditions (TX or RX) = 6…
* Overview * Video Overview A Just Add Power Standard Video Wall is made up of multiple displays that each have their own Receiver. The displays must be the same size and orientation and must be aligned edge-to-edge in a seamless rectangle. This setup allows a source to be viewed as a single-screen or any sizing w…
* Overview * Included Hardware Overview The Just Add Power MaxColor Matrix Demo Kit is designed as a simple 2-Input, 2-Output system that provides an Installer the opportunity to gets hands-on experience with Just Add Power's 4K60 AV over IP system without any investment required. Find out how to get your hands o…
* Release Date * Compatibility * Download * New Features * Major Changes * Minor Enhancements * Bug Fixes * Known Issues * Previous Versions 3.4.3 Release Date 2022-08-18 Compatibility * MAX v3.5.2 is fully compatible with all MAX v3.x.x versions * MAX v3.5.2 operates on MaxColor MC-RX1 and MC-TX1…
Model Number MC-RX2 Go to Product Page Compatibility All MaxColor devices are compatible with each other. For information on how to bridge MaxColor devices with an existing 3G Ultra system, please see this article .
* Overview * Null Modem Jumper * Receivers MC-RX1 MC-RX2 * Transmitters MC-TX1 MC-TX2 Overview MaxColor Transmitters and Receivers have a null modem jumper on the bottom of the unit that flips the transmit and receive pins on the RS232 port. The nature of RS232 is that there is always a 50% chanc…
Overview The MaxColor MC-QX Tiling Transmitter gives every MaxColor system the ability to mix four video sources from any Transmitter and combine those into a new, unique, compiled video source that can be viewed by any Receiver in the matrix. A Tiling Transmitter consists of four MaxColor Receivers , and o…