Ultra Series - DC Power Supply - Specifications
All devices in the Ultra Series use the same format of power supply: * 4.7 to 18 Volts * 5.5mm outside, 2.1mm inside barrel connector * positive tip * Enough Amps to produce 10 Watts - calculated by using Watts = Volts x Amps Power supplies with these specifications can be found at any electronics retailer that …
06-Feb-2025
MaxColor Series - DC Power Supply - Specifications
All devices in the MaxColor system are POE - power is provided by a POE switch. If a power supply is needed, devices in the MaxColor system use the same format of power supply: * 4.7 to 18 Volts * 5.5mm outside, 2.1mm inside barrel connector * positive tip * Enough Amps to produce 10 Watts - calculated by using…
11-Feb-2025
Ultra Series - DC Power Supply - Specifications (UL-709P2P)
The UL-709P2P Point-to-Point Encoder requires more power than a typical Ultra device, and does not ship with a power supply included. Each unit requires between 8-10 Watts of power. A 50-watt power supply* will be sufficient to power a single UL-709P2P and 4 POE Decoders connected inline. Power supply requirements: …
06-Feb-2025
2G Series - DC Power Supply - Specifications
All 2G series devices use the same format of power supply: * 5 Volts * 2 amps or greater (to get 10 Watts, where Watts = Volts x Amps) * 5.5mm outside, 2.1mm inside barrel connector * positive tip DO NOT use a power supply greater than 5 Volts. Doing so will cause irreparable damage to the unit. Power supplies…
13-Feb-2025
Omega Series - DC Power Supply - Specifications
All devices in the Omega Series use the same format of power supply: * 4.7 to 18 Volts * 5.5mm outside, 2.1mm inside barrel connector * positive tip * Enough Amps to produce 10 Watts - calculated by using Watts = Volts x Amps Power supplies with these specifications can be found at any electronics retailer that …
07-Feb-2025
