You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Thanksgiving: Support will not be available Thursday November 28th through Sunday December 1st. We will re-open Monday December 2nd.

Showing articles from Cisco tag

[JADConfig][Legacy] AMX Cisco Driver requires License Key

* Legacy Driver * Overview * Download * Versions * Changes Legacy Driver This driver was discontinued ton February 3, 2020 and will no longer be updated. See the AMX Cisco Driver Package article for the latest version. This driver requires a License Key to function. License keys are tied to the serial num…

[Cisco CBS350] Download Switch Configuration via webUI

* Overview * Walkthrough Overview Downloading a switch configuration file might be done for any of these reasons: * Having a backup copy of the switch configuration in case of failure * Copying the configuration from one switch to another Walkthrough * Login to the switch webUI * On the left menu, select  Ad…

[JADConfig] Elan g! Integration Notes: Cisco

The PDF attached to this Knowledge Base article contains the integration notes from Elan g! for use with the Cisco SG300/SG500 series switches. The driver available in the Elan g! software releases versions 6.4.200 and later include support for the Cisco SG300 series of unstacked switches and Cisco SG500 stacked s…

Cisco Login Disable/Enable

* Overview * Disable Login * Re-enable Login Overview Not all control systems can navigate a username/password prompt. For those that can't, we can disable the switch login to go straight to the interface. If you are using a Driver from Just Add Power , the switch must have login enabled . These instructions …

3G System on Cisco switch with No Video

Jumbo Frames are required on switches that are passing 3G video. Luxul switches have Jumbo Frames enabled by default, but they must be enabled on Cisco switches in 3G systems. Running JADConfig will enable Jumbo Frames on Cisco switches. If JADConfig is not being used to update the system: * Use Putty to login to…

[AMP] [Standardized] Multi-Switch Considerations

Overview If the Right Switch for a Standardized System (also known as a VLAN Switching System) requires more than one switch, AMP supports up to 63 switches in a single system. Those switches need additional considerations: * All switches in the system must be from the SAME MANUFACTURER , but may be differen…

[JADConfig] AMX Driver Download

* Overview * Download * Versions * Changes * [Legacy] Licensed Version Overview This driver package provides Matrix Control, Endpoint Control, and Feature Control of a Just Add Power VLAN switching system configured with JADConfig . * Matrix Control - switch any display to watch any source * Endpoint Contro…

JADConfig Walkthrough - Cisco SG500/SG500X

Just Add Power 2G and 3G HDMI over IP matrix switching systems support the Cisco SG500 and SG500X in stacked and unstacked setups. Video of the full JADConfig procedure for the Cisco SG300 is available here . Download JADConfig and follow along with the video to setup your Just Add Power HDMI matrix switching s…

Upload Switch Config to Cisco CBS350 Series

* Overview * Minimum Switch Firmware * Walkthrough Overview Uploading a switch configuration file might be done for any of these reasons: * Running AMP and loading the Discovery Configuration file * Copying the configuration from a defective switch into the replacement switch These instructions will fit any …

[JADConfig] Crestron Driver Training - Switching Driver

Just Add Power has Crestron switching drivers that control HDMI matrix switching on Cisco and Luxul switches. Download the training video here Cisco * SG300 * SG500 * SG500X Luxul * AMS-1208P * AMS-2600 * AMS-2616P * AMS-4424P * XMS-2624P * XMS-5248P * XMS-7048P Download the training video here

scroll to top icon