You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.

⚠ JADConfig will reach End of Support on January 1, 2027. View the official notice

Showing articles from TP-Link tag

[TP-Link JetStream] Download Switch Configuration via webUI

* Overview * Walkthrough Overview Downloading a switch configuration file might be done for any of these reasons: * Having a backup copy of the switch configuration in case of failure * Copying the configuration from one switch to another Walkthrough * Login to the switch webUI * Go to the  System  tab along…

Multi-Switch Considerations for AMP Standardized Systems

Overview If the Right Switch for a Standardized System (also known as a VLAN Switching System) requires more than one switch, AMP supports up to 63 switches in a single system. Before You Begin: Multi-switch AMP Standardized systems require switches from the same manufacturer, 10Gb SFP+ interconnects, and suff…

Upload Switch Config to TP-Link TL-SG34XX Series

Warning: Maximum Firmware Versions The firmware versions listed below are the maximum supported versions for the specified switch hardware versions. Do not install newer firmware. * SG3428XMP V3.20 and V3.26 : Firmware 3.20.0 Build 20231019 V3.30 and V3.36 : Firmware 3.30.0 Build 20251125 * SG3452P …

Supported Switches for AMP Standardized Systems

Overview AMP can build a Standardized Configuration on any supported switch listed in this article. Standardized Configurations are compatible with Just Add Power-provided drivers . When planning a Standardized System, also known as a VLAN Switching System, select a managed gigabit Ethernet switch that can accommo…

scroll to top icon