-
Plan Network Bandwidth for Just Add Power Systems
Overview A Just Add Power system needs sufficient bandwidth at each Encoder and Decoder connection and across every shared network link carrying audio, video, and USB traffic. This article covers bandwidth planning for Omega Series, Ultra Series, and MaxColor Series systems configured with AMP Standardized Configur…
01-Oct-2026
-
Stacking vs Trunking for Multi-Switch Systems
Overview Stacking and trunking are different ways to connect multiple network switches. The main difference is how the switches are managed: a stack operates as one logical switch, while trunk-connected switches retain their own configurations and management interfaces. For Just Add Power systems, the configuration…
01-Oct-2026
-
Multi-Switch Considerations for AMP Standardized Systems
Overview AMP supports up to 63 switches in a single Standardized Configuration system, also known as a VLAN Switching System. Use multiple switches when the required device count or installation layout cannot be accommodated by one supported switch . Before you begin: Multi-switch AMP Standardized Configuration…
27-Oct-2026
⚠️ JADConfig will reach End of Support on January 1, 2027. View the official notice! ⚠️
