You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Thanksgiving: Support will not be available Thursday November 28th through Sunday December 1st. We will re-open Monday December 2nd.

Showing articles from SFP+ tag

[AMP] [Standardized] JADConfig Stack Conversion

Overview Advanced Matrix Programmer provides a path forward for all legacy installations configured using JADConfig in a stacked topology using two or more switches. This article covers the steps required to migrate from Stacking to Trunking, combining or replacing any existing legacy multi-switch models at the job…

[AMP] [Standardized] Multi-Switch Considerations

Overview If the Right Switch for a Standardized System (also known as a VLAN Switching System) requires more than one switch, AMP supports up to 63 switches in a single system. Those switches need additional considerations: * All switches in the system must be from the SAME MANUFACTURER , but may be differen…

[AMP] [Standardized] Choosing the Right Switch

Overview Building a Standardized Configuration in AMP will fully configure the switches listed below and make them compatible with Just Add Power-provided  drivers to support them. When planning a Standardized System (also known as a VLAN Switching System), one of the most important decisions is the managed gigabi…

scroll to top icon