⚠️ JADConfig will reach End of Support on January 1, 2027. View the official notice! ⚠️
Remove Luxul Stack Settings Before Building an AMP System
Overview Luxul switches configured as a physical stack must be separated and returned to factory defaults before they can be configured as individual switches with AMP. This procedure removes the existing stack relationship and prepares each switch for the appropriate AMP Build New workflow. It does not configure…
18-Sep-2026
Convert an Established Omega/Ultra JADConfig Stack-Switch System to AMP
Overview This article explains how to migrate an established Omega Series or Ultra Series system from a JADConfig Luxul switch stack to an AMP Standardized multi-switch configuration. The procedure separates the existing stacked switches, applies an individual AMP discovery configuration to each switch, reconnects …
05-Aug-2026
Multi-Switch Considerations for AMP Standardized Systems
Overview If the Right Switch for a Standardized System (also known as a VLAN Switching System) requires more than one switch, AMP supports up to 63 switches in a single system. Before You Begin: Multi-switch AMP Standardized systems require switches from the same manufacturer, 10Gb SFP+ interconnects, and suff…
28-Aug-2026
Supported Switches for AMP Standardized Systems
Overview AMP can build a Standardized Configuration on any supported switch listed in this article. Standardized Configurations are compatible with Just Add Power-provided drivers . When planning a Standardized System, also known as a VLAN Switching System, select a managed gigabit Ethernet switch that can accommo…
28-Aug-2026
