⚠ JADConfig will reach End of Support on January 1, 2027. View the official notice ⚠
Cisco Login Disable/Enable
* Overview * Disable Login * Re-enable Login Overview Not all control systems can navigate a username/password prompt. For those that can't, we can disable the switch login to go straight to the interface. If you are using a Driver from Just Add Power , the switch must have login enabled . These instructions …
01-Mar-2021
Cisco Switch Firmware - Password Bypass
* Overview * Affected Versions * Fix via webUI via CLI Overview Cisco switches at factory default ask the user to change the login username and password on first connection. On older firmware, this process could be bypassed to leave the default settings of cisco/cisco. Newer Cisco firmware has removed the …
16-Mar-2021
Supported Switches for JADConfig Systems
Legacy For existing JADConfig systems only. End of Support Notice: JADConfig systems will reach End of Support on January 1, 2027. Migration to AMP will be required before the Just Add Power Support Team can provide further troubleshooting or system service. See JADConfig End of Support Notice for requirements…
29-Jul-2026
