Cisco Login Disable/Enable
* Overview * Disable Login * Re-enable Login Overview Not all control systems can navigate a username/password prompt. For those that can't, we can disable the switch login to go straight to the interface. If you are using a Driver from Just Add Power , the switch must have login enabled . These instructions …
01-Mar-2021
JADConfig Walkthrough - Cisco SG500/SG500X
Just Add Power 2G and 3G HDMI over IP matrix switching systems support the Cisco SG500 and SG500X in stacked and unstacked setups. Video of the full JADConfig procedure for the Cisco SG300 is available here . Download JADConfig and follow along with the video to setup your Just Add Power HDMI matrix switching s…
10-Apr-2018
Cisco Switch Firmware - Password Bypass
* Overview * Affected Versions * Fix via webUI via CLI Overview Cisco switches at factory default ask the user to change the login username and password on first connection. On older firmware, this process could be bypassed to leave the default settings of cisco/cisco. Newer Cisco firmware has removed the …
16-Mar-2021
[JADConfig] Multi-Switch Considerations
* Multi-Switch Models * Stack vs Trunk * Bandwidth Considerations * SFP/SFP+ Cables Multi-Switch Models JADConfig joins switches together using Stacking topology. This means that ALL switches in the stack must be the same manufacturer and same model number. If the Right Switch for a JADConfig system require…
02-Aug-2023
[JADConfig] Choosing the Right Switch
Overview JADConfig is no longer being updated. New systems should use AMP to configure systems, and should use the Choosing the Right Switch for AMP VLAN article to choose a switch. When planning an installation, one of the most important decisions is the managed gigabit Ethernet switch that is the center of th…
19-Jul-2024
