Setup a New System Using a Cisco SG500/SG500X with JADConfig - Video Guide
Jul 31, 2026
Legacy For existing JADConfig systems only.
End of Support Notice: JADConfig systems will reach End of Support on January 1, 2027. Migration to AMP will be required before the Just Add Power Support Team can provide further troubleshooting or system service.
See JADConfig End of Support Notice for requirements and migration-planning information.
Overview
Just Add Power 2G Series and Ultra Series AV over IP systems support the Cisco SG500 and SG500X in standalone and multiswitch setups.
Video Instructions
Video of the full JADConfig procedure for the Cisco SG300 is available here.
Download JADConfig and follow along with the video to setup your Just Add Power HDMI matrix switching system.
