You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.

⚠️  JADConfig will reach End of Support on January 1, 2027. View the official notice!   ⚠️

Showing articles from Commands tag

[3G Ultra] [Wallplate] Settings and Commands

Overview Two types of Wallplate Transmitters are available: * VBS-HDIP-717WP2: 2-gang, HDMI and VGA in, Line-In, Micro USB, Source Dipswitch, POE network * VBS-HDIP-718WP4: 4-gang, HDMI and VGA in, Line-In, Micro USB, Source Dipswitch, POE network, Mic-In, HDMI out, Stereo out, RS232 with null modem Settings are …

section icon

Omega & Ultra Series

last updated icon

25-Jun-2024

3G Transmitter CLI Command Line Wallplate 717WP2 718WP4 Wall Plate VBS-HDIP-717WP2 VBS-HDIP-718WP4 Device Management astparam 718 717 Settings Parameters Commands

CLI Commands for Omega & Ultra Series Devices

Overview Omega and Ultra Series devices use the same firmware and operating system. Commands on Just Add Power alter the live behavior of the device. Commands will execute immediately, but may not persist through reboot. Requires devices to be on justOS firmware version B1.0.0 or later. For Settings that alter …

section icon

Omega & Ultra Series

last updated icon

05-Jun-2026

Commands Command Line 3G Omega Ultra Device

scroll to top icon