Overview Starting with firmware version A6.5.5, Just Add Power introduced support for disabling the Power and Data LED indicators on both Encoders and Decoders. This functionality can be accessed by sending a command string via Telnet to the target device's IP address on port 23. Command lightsoff.sh Note: This…
Overview Every Just Add Power 3G devices on justOS firmware has a Power LED and a Data LED whose behaviors are diagnostically relevant and editable. Default LED behavior can be referenced in the Power & Data Lights Troubleshooting Section This article deals with Commands - instant changes to behavior. For info…
Just Add Power devices have 2 green lights on the front of the device that are diagnostically relevant: a Power Light and a Data Light. On a rackmount unit, the lights on the port-side are diagnostically relevant. Receiver Interpretation: A Receiver with a solid Power Light and solid Data Light has: * Booted up p…
Just Add Power devices have 2 green lights on the front of the device that are diagnostically relevant: a Power Light and a Data Light. On a rackmount unit, the lights on the port-side are diagnostically relevant. Healthy Behavior: The Power Light goes solid and the Data Light stays off for 5-10 seconds after the b…
Just Add Power devices have 2 green lights on the front of the device that are diagnostically relevant: a Power Light and a Data Light. On a rackmount unit, the lights on the port-side are diagnostically relevant. Healthy Behavior: The Power Light on a device is performs a Heartbeat Blink - two quick blinks followe…
Just Add Power devices have 2 green lights on the front of the device that are diagnostically relevant: a Power Light and a Data Light. On a rackmount unit, the lights on the port-side are diagnostically relevant. Receiver Interpretation: A Receiver with a solid Power Light and blinking Data Light has: * Booted u…