You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Support will be closed on Independence Day: July 4th. Normal hours resume July 7th.

Showing articles from Off tag

How to Control the Power & Data LED for 2G Series Devices

Overview Starting with firmware version A6.5.5, Just Add Power introduced support for disabling the Power and Data LED indicators on both Encoders and Decoders. This functionality can be accessed by sending a command string via Telnet to the target device's IP address on port 23. Command lightsoff.sh Note: This…

scroll to top icon