How to Control the Power & Data LED for 2G Series Devices
Overview Starting with firmware version A6.5.5, Just Add Power introduced support for disabling the Power and Data LED indicators on both Encoders and Decoders. This functionality can be accessed by sending a command string via Telnet to the target device's IP address on port 23. Command lightsoff.sh Note: This…
26-Jun-2025
[3G Ultra] Power & Data LED Management
Overview Every Just Add Power 3G devices on justOS firmware has a Power LED and a Data LED whose behaviors are diagnostically relevant and editable. Default LED behavior can be referenced in the Power & Data Lights Troubleshooting Section This article deals with Commands - instant changes to behavior. For info…
25-Jun-2024
