-
Control Decoder HDMI Output (Omega, Ultra, and MaxColor Series)
Overview Omega Series, Ultra Series, and MaxColor Series Decoders provide controls for changing HDMI output immediately or configuring what happens automatically when video is lost. Choose the instructions below based on the behavior you need. Change HDMI Output Immediately Use CLI commands when an installer or c…
-
Configure Video and Audio on Ultra Series Wallplate Encoders (717WP2 and 718WP4)
Overview Configure HDMI and VGA selection, startup behavior, and audio on the Ultra Series UL-717WP2 and UL-718WP4 Wallplate Encoders. These models were previously identified as VBS-HDIP-717WP2 and VBS-HDIP-718WP4. * 717WP2: 2-gang; HDMI, VGA, Line-In, Micro USB, source switch, and PoE network connection. * 71…
-
How to Manage Power and Data LEDs (Omega, Ultra, and MaxColor Series)
Overview Omega Series, Ultra Series, and MaxColor Series Encoders and Decoders support commands and settings that change Power and Data LED behavior. * Commands: Change LED behavior immediately without a reboot. These changes do not persist through a reboot. * Startup settings: Change LED behavior after the set…
-
Startup Settings (Omega, Ultra, and MaxColor Series)
Overview Startup settings determine how a device behaves after it boots. These settings are stored in non-volatile memory and remain active after the device is power cycled. This article covers Omega Series, Ultra Series, and MaxColor Series devices running the latest firmware for their series. Before using these…

