⚠️ JADConfig will reach End of Support on January 1, 2027. View the official notice! ⚠️
CLI Settings for 2G Series Devices
Overview Startup settings on a Just Add Power device define how the unit behaves when it powers on. Any changes made to these settings are not applied immediately and will only take effect after the device is rebooted. Many settings are intended for specific installation scenarios and should not be applied as g…
15-Jan-2026
Startup Settings for Omega & Ultra Series Devices
Overview Startup settings determine how an Omega Series or Ultra Series device behaves after it boots. They are stored in non-volatile memory and remain active after the device is power cycled. Most startup settings are configured through the Command Line Interface (CLI) using the astparam utility. This article…
02-Sep-2026
