* Overview * 1080p Stereo EDID * 4k30 Stereo EDID Overview The AppleTV OS17 update added support for 44.1kHz sample rate. This causes issues. The EDIDs below remove Just Add Power support for 44.1kHz sample rate, preventing an HDMI source from outputting at that sample rate. The symptom of audio skipping - audio…
* Overview * Apply 720p EDID to 2G * Apply 720p EDID to 3G Overview 720p EDIDs are not part of the standard EDID offerings on Just Add Power devices, as the standard EDIDs request 4K or 1080p at maximum. Sometimes it is necessary for a source to output 720p but the source menu is not cooperating. When that happen…
The PDF attached to this Knowledge Base article provides step-by-step instructions on how to capture an EDID from a 2G Receiver connected your desired HDMI display to be saved onto your 2G Transmitters. 2G and 3G have the same procedure for changing EDIDs. Default EDIDs on the Transmitter can be used, or the ED…
Overview Each Just Add Power Transmitter handles EDID negotiation with the Source it is connected to using the EDID stored in the Transmitter itself. On the Receiver side, the EDID of the Display is not used in the system unless the Video Scaler is set to Auto-Detect per EDID or the EDID Capture procedure i…
Overview The Default EDID on 3G Ultra Transmitters ask for the maximum audio and video format that they are capable of. However, there may be instances where the default EDID on the Transmitter does not produce the desired result, or special resolutions, color-space options, or audio formats are needed. In those c…