⚠️ JADConfig will reach End of Support on January 1, 2027. View the official notice! ⚠️
Add New Devices On-site to an Established System with AMP Alternate Configuration
Overview Advanced Matrix Programmer (AMP) can add new Omega Series, Ultra Series, or MaxColor Series Encoders and Decoders to an established Alternate Configuration system while at the jobsite. AMP communicates with one established device to retrieve the system settings and existing device assignments. The new devi…
27-Aug-2026
Configure New Devices Off-site for an Established System with AMP Alternate Configuration
Overview Advanced Matrix Programmer (AMP) can configure new Omega Series, Ultra Series, or MaxColor Series Encoders and Decoders at an office before they are added to an established Alternate Configuration system at the jobsite. Because AMP cannot communicate with the established system during an off-site configura…
21-Aug-2026
How to Adjust HDCP Settings (Omega, Ultra, and MaxColor Series)
Overview High-bandwidth Digital Content Protection (HDCP) is a form of digital copy protection used on HDMI connections to prevent unauthorized recording or distribution of protected content. In a Just Add Power system, HDCP behavior can be managed at both the Encoder and Decoder level to ensure compatibility with a…
30-Apr-2026
justOS HTTP API Overview (Omega, Ultra, and MaxColor Series)
Overview Just Add Power’s justOS HTTP API (justAPI) is a RESTful interface that allows external systems, scripts, and control platforms to monitor and interact with supported Devices. The API provides access to real-time device status, configuration settings, and command execution for both Encoders and Decoders. …
30-Apr-2026
Ultra Series Decoder Comparison
Overview Ultra Series Decoders connect displays and other HDMI destinations to an Ultra Series Just Add Power system. All models provide the core video distribution capabilities of the Ultra Series, but their available connections and hardware features vary. Use the comparison tables below to select the appropriate…
15-Jul-2026
Ultra Series Encoder Comparison
Overview Ultra Series Encoders connect source devices to an Ultra Series Just Add Power system. All models provide the core video distribution capabilities of the Ultra Series, but their available connections, audio features, power options, and form factors vary. Use the comparison tables below to select the approp…
15-Jul-2026
Just Add Power System Takeover Guide: Identification, Inventory, and Documentation
Overview When servicing an unfamiliar Just Add Power installation, the original system documentation may be unavailable, incomplete, or no longer reflect the equipment currently installed. Before making changes, gather information about the system hardware, switch connections, network settings, firmware, and control…
26-Aug-2026
Build a New System on an Existing Network with AMP Alternate Configuration
Overview Advanced Matrix Programmer (AMP) can configure a new Omega Series, Ultra Series, or MaxColor Series system on an existing managed network using Alternate Configuration . In an Alternate Configuration, AMP configures only the Just Add Power Encoders and Decoders. The Installer or network administrator is r…
18-Aug-2026
Download AMP and Configure an Omega, Ultra, and MaxColor Series System
Overview AMP (Advanced Matrix Programmer) configures Omega, Ultra, and MaxColor Series devices into an HDMI matrix switching system. It is the modern replacement for JADConfig and supports both standardized and custom (alternate) configurations. If you were previously using JADConfig for Omega or Ultra systems, yo…
28-Aug-2026
