How to Access a Device (Omega, Ultra, and MaxColor Series)
Overview This article explains how to access devices in a system environment, whether through a direct local connection or across an established network. It provides the foundational steps required to: * Connect to a device * Identify its IP address * Ensure network communication * Prepare for access using web…
01-May-2026
How to Adjust HDCP Settings (Omega, Ultra, and MaxColor Series)
Overview High-bandwidth Digital Content Protection (HDCP) is a form of digital copy protection used on HDMI connections to prevent unauthorized recording or distribution of protected content. In a Just Add Power system, HDCP behavior can be managed at both the Encoder and Decoder level to ensure compatibility with a…
30-Apr-2026
How to Access the webUI (Omega, Ultra, and MaxColor Series)
Overview This article explains how to access the webUI of a device. The webUI allows you to view device status, configure settings, and perform firmware updates. Before proceeding, ensure you have network access to the device and know its IP address. If you need assistance connecting to a device or identifying its…
01-May-2026
Applying 720p Custom EDIDs on Just Add Power Encoders
Overview Just Add Power EDIDs normally request a minimum output of 1080p or 4K. If your source device does not offer a 720p option in its own menu, you can force 720p by applying a 720p custom EDID to the connected Encoder . Warning: Applying a custom EDID immediately forces the source to re-handshake. The Encode…
01-Dec-2025
How to Factory Default a Device (Omega, Ultra, and MaxColor Series)
Overview This article outlines the available methods to factory default a Just Add Power Omega (OM), Ultra (UL), and MaxColor (MC) Series device. Minimum Supported Firmware: * Omega (OM) and Ultra (UL) Series: B1.1.0 or newer * MaxColor (MC) Series: MAX v3.5.2 or newer Note: Omega (OM) and Ultra (UL) Series…
01-May-2026
How to Reset to Factory Defaults for 2G Series Devices
Overview This article outlines the available methods to factory default a Just Add Power 2G Series device. Warning: Performing a factory default will immediately erase all configuration settings and reboot the device. This action does not prompt for confirmation. Choosing a Factory Default Method Use the metho…
01-May-2026
justOS HTTP API Overview (Omega, Ultra, and MaxColor Series)
Overview Just Add Power’s justOS HTTP API (justAPI) is a RESTful interface that allows external systems, scripts, and control platforms to monitor and interact with supported Devices. The API provides access to real-time device status, configuration settings, and command execution for both Encoders and Decoders. …
30-Apr-2026
Switching Control with JPSW in AMP Standardized Systems
Overview The JPSW switching protocol is used to control source routing in AMP Standardized systems , allowing control systems to switch video sources to one or more Decoders using simple text-based commands. In this architecture, commands are sent directly to any Just Add Power device, making each device a potenti…
30-Apr-2026
