You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
You are viewing the article in preview mode. It is not live at the moment.

⚠️  JADConfig will reach End of Support on January 1, 2027. View the official notice!   ⚠️

Showing articles from PuTTY tag

How to Factory Default a Device (Omega, Ultra, and MaxColor Series)

Overview This article outlines the available methods to factory default a Just Add Power Omega (OM), Ultra (UL), and MaxColor (MC) Series device. Minimum Supported Firmware: * Omega (OM) and Ultra (UL) Series: B1.1.0 or newer * MaxColor (MC) Series: MAX v3.5.2 or newer Note: Omega (OM) and Ultra (UL) Series…

Section: Device Configuration

Last Updated at

04-May-2026

Tags: PuTTY MaxColor Series Ultra Series Omega Series Encoders Just Add Power Decoders firmware requirements factory default reset device device reset restore defaults webUI reset Telnet reset debug cable reset command line access reset_to_default.sh retain IP full reset network settings Auto IP 169.254.x.x AMP Standardized systems device reconfiguration troubleshooting system recovery

How to Factory Default a Device (2G Series and 2G Legacy Mode)

Overview This article outlines the available methods to factory default a Just Add Power 2G Series device. Warning: Performing a factory default will immediately erase all configuration settings and reboot the device. This action does not prompt for confirmation. Choosing a Factory Default Method Use the metho…

Section: 2G Legacy Mode

Last Updated at

02-Oct-2026

Tags: PuTTY 2G Series Encoders Just Add Power Decoders factory default reset device device reset restore defaults webUI reset Telnet reset debug cable reset command line access reset_to_default.sh retain IP network settings Auto IP 169.254.x.x troubleshooting system recovery system reset device reboot configuration reset 2G Legacy Mode

Just Add Power System Takeover Guide: Identification, Inventory, and Documentation

Overview When servicing an unfamiliar Just Add Power installation, the original system documentation may be unavailable, incomplete, or no longer reflect the equipment currently installed. Before making changes, gather information about the system hardware, switch connections, network settings, firmware, and control…

Section: System Design & Planning

Last Updated at

22-Sep-2026

Tags: JADConfig Bonjour Browser PuTTY AMP 2G Series MaxColor Series Ultra Series Omega Series AV over IP Encoders Just Add Power AMP Standardized Decoders takeover assistance system takeover system identification AMP Alternate custom multicast system inventory site survey legacy systems report file device inventory switch configuration switch discovery switch IP address switch login firmware verification control system identification network troubleshooting Advanced IP Scanner Angry IP Scanner system documentation installation audit service visit jobsite documentation 1G Series takeover form troubleshooting guide