You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
You are viewing the article in preview mode. It is not live at the moment.

⚠️  JADConfig will reach End of Support on January 1, 2027. View the official notice!   ⚠️

Showing articles from Network Configuration tag

Using the Built-In DHCP Server on Just Add Power Decoders

Overview The built-in DHCP Server on a Just Add Power Decoder can provide IP addresses to third-party network devices connected to the Just Add Power Device Network, such as control processors, displays, touch panels, streaming devices, and other network-enabled equipment. For more information about supported conne…

Section: Network Management

Last Updated at

29-Aug-2026

Tags: JADConfig Telnet Static IP DHCP MaxColor Series Ultra Series Omega Series AMP Standardized DHCP Server Decoder DHCP Server Network Configuration Device Network Static Addressing Third-Party Devices Network Access Decoder Switchport

Build a New System on an Existing Network with AMP Alternate Configuration

Overview Advanced Matrix Programmer (AMP) can configure a new Omega Series, Ultra Series, or MaxColor Series system on an existing managed network using Alternate Configuration . In an Alternate Configuration, AMP configures only the Just Add Power Encoders and Decoders. The Installer or network administrator is r…

Section: Alternate Configuration

Last Updated at

18-Aug-2026

Tags: Walkthrough Training System Setup Device Discovery Static Route Multicast Switching Multicast AMP Advanced Matrix Programmer Alternate Configuration Encoder Decoder MaxColor Series Ultra Series Omega Series AV over IP Network Configuration New Installation