You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
You are viewing the article in preview mode. It is not live at the moment.

⚠️  JADConfig will reach End of Support on January 1, 2027. View the official notice!   ⚠️

Showing articles from On-Site tag

Add New Devices On-site to an Established System with AMP Alternate Configuration

Overview Advanced Matrix Programmer (AMP) can add new Omega Series, Ultra Series, or MaxColor Series Encoders and Decoders to an established Alternate Configuration system while at the jobsite. AMP communicates with one established device to retrieve the system settings and existing device assignments. The new devi…

Section: Alternate Configuration

Last Updated at

27-Aug-2026

Tags: Walkthrough Training Firmware Device Discovery AMP Advanced Matrix Programmer On-Site Alternate Configuration Encoder Decoder MaxColor Series Ultra Series Omega Series AV over IP Add Devices System Expansion

Add a Device On-Site with AMP - Video

Overview AMP - Advanced Matrix Programmer - is software that configures Omega, Ultra and MaxColor series Just Add Power devices into an HDMI matrix switching system. This video demonstrates adding a device to a Standardized Configuration while on-site. Add Device expects that the switch already has an open port …

Section: AMP Videos

Last Updated at

29-May-2025

Tags: VLAN AMP Advanced Matrix Programmer Training Video Add a Device Expand On-Site Walkthrough Standardized Configuration Let's Go Standardized