You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Support will be closed on Juneteenth: June 19th. Normal hours resume June 20th.
Home > Device Management > 2G Series Device Management > How to Modify the EDID for 2G Series Encoders
How to Modify the EDID for 2G Series Encoders
print icon

The PDF attached to this Knowledge Base article provides step-by-step instructions on how to capture an EDID from a 2G Receiver connected your desired HDMI display to be saved onto your 2G Transmitters.

2G and 3G have the same procedure for changing EDIDs.

Default EDIDs on the Transmitter can be used, or the EDID from an endpoint device can be captured onto the Transmitter.

scroll to top icon