You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Thanksgiving: Support will not be available Thursday November 28th through Sunday December 1st. We will re-open Monday December 2nd.
Home > System Design & Planning > Product Information > 2G > [2G] Power Supply Specifications
[2G] Power Supply Specifications
print icon

All devices in the 2G System use the same format of power supply:

  • 5 Volts
  • 2 amps or greater (to get 10 Watts, where Watts = Volts x Amps)
  • 5.5mm outside, 2.1mm inside barrel connector
  • positive tip

DO NOT use a power supply greater than 5 Volts. Doing so will cause irreparable damage to the unit.

Power supplies with these specifications can be found at any electronics retailer that sells power supplies.

Example Power Supply: https://www.digikey.com/product-detail/en/phihong-usa/AA10A-050A-R/993-AA10A-050A-R-ND/11203820

scroll to top icon