You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Support will be closed on Juneteenth: June 19th. Normal hours resume June 20th.
Home > Control Systems > Elan/Nice Home Management > Instructions - Setup an Elan/Nice Home Management Serial Driver for JADConfig Systems
Instructions - Setup an Elan/Nice Home Management Serial Driver for JADConfig Systems
print icon

The PDF attached to this Knowledge Base article contains the integration notes from Elan g! for use with the Just Add Power 2G/2G+/3G devices.

 

The driver available in the Elan/Nice Home Management software releases versions 6.4.200 and later include support for utilizing the Just Add Power device RS232 ports for end-point control. Support in this driver is for Serial-over-IP functionality only.

 

The Elan/Nice Home Management published driver is based off of systems setup using the JADConfig program from Just Add Power. Details on using JADConfig, including the tool itself are available on the Just Add Power Knowledge Base under the JADConfig section.

scroll to top icon