3G Ultra Firmware: B3.0.1

Nov 11, 2024

Download

2024-10-18

All versions of B3.x.x WILL work together
B3.x.x operates on all 2GΩ and 3G models
B3.x.x WILL work with all control system drivers previously developed to control a Just Add Power TX/RX using Legacy API command syntax
B3.x.x is NOT compatible with B2.x.x or B1.x.x
B3.x.x is NOT compatible with 2G devices

[CLI] commandallrx.sh now functions as expected when the command includes quotes

Key: [impact level][feature affected][affected version] Description

[All][Audio][B3.0.0] Disabling audio services causes devices to not boot correctly and breaks access to the API and webUI
- Symptoms:
  - webUI gets stuck on the spinning blocks logo, and will not load further
  - channel commands do not work, and cause the telnet session to lock up when sent
  - getmodel.sh does not work, and cause the telnet session to lock up when sent
  - Audio does not work. However, this will often happen on systems where the user EXPECTS audio to not work so they will not necessarily report it as a symptom.
  - The astparam dump will show no_i2s=y
- Workarounds:
  1. Enable audio services via telnet with the command astparam s no_i2s;astparam save;sleep 1;reboot
  2. Back-date firmware to B2.3.9 if you need audio services disabled
[All Devices][IR][B3.0.1] Global Cache and Global Cache Compressed IR commands do not send
- Use Pronto formatted IR commands

Release Date: 2024-09-05

For firmware versions that are compatible with both 2G and 3G systems, please see 2G and Hybrid Firmware.