All codes sent are in **HEX** format. _(Sending the below commands as ASCII characters will not work, codes must be sent as HEX) _ Command Code (HEX) Control System Representation Enable Standby (Must be sent while TV is on to enable RS232 control) 8C 00 01 02 01 90 `\x8C\x00\x01\x02\x01\x90` Power On 8C 00 ...
* [Overview][1] * [Codes][2] * [Docklight Profile][3] * [Notes][4] * * * ## Overview These codes are known to work on Sony TVs. All codes sent are in **ASCII** format. IR codes must be terminated with a Carriage Return in order to be sent through Just Add Power devices. * * * ## Codes Command Code (Pront...
* [Overview][1] * [Recommended Settings][2] * * * ## Overview Sony displays have advanced video processing features meant to enhance the picture. Unfortunately, some of these settings negatively interfere with the picture, causing the result to be worse than the original signal. Over-processing will present in ...
* [Overview][1] * [Codes][2] * [Docklight Profile][3] * [Notes][4] * * * ## Overview These codes are known to work on Sony Blu-Ray Players. All codes sent are in **ASCII** format. IR codes must be terminated with a Carriage Return in order to be sent through Just Add Power devices. * * * ## Codes Command...