You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Support will close at 3:00 pm Eastern on December 20th. Limited support will be available from 8:00 am to 6:00 pm on December 23rd, 26th, 27th, and 30th. Support will be closed December 24th, 25th, and 31st as well as New Year's Day.

Happy Holidays!
announcement close button
Home > Firmware > MaxColor Firmware > Current Version > MaxColor Firmware: v4.1.2
MaxColor Firmware: v4.1.2
print icon
Dec 12, 2024

Download Latest Firmware

Release Date

2024-10-18

Compatibility

  • MAX v4.1.2 is compatible with all MAX v4.x.x versions
  • MAX v4.1.2 operates on models:
    • MC-RX1
    • MC-RX2
    • MC-TX1
    • MC-TX2
    • MC-TX3
    • MC-TXWP1
    • MC-QX (MC-TXQ and MC-RXQ)
  • MAX v4.x.x is NOT compatible with MAX v3.x.x versions

Release Notes

Added

  • [jpsw] v1.6.0: Support for Luxul XX5 series switches (505, 515, 615)
  • [webUI]
    • JPSW matrix page link at /jpsw
    • favicon.ico is a blue pluggy
  • [QX] qx version command reports MCU versioning

Fixed

  • [Video Wall] Mosaic video wall commands apply and revert to standard mode without reboot of Receivers

Changed

  • [Scaler] Added options for 4K60 and 4K50 to dropdown
  • [CLI]
    • Updated audio, video, usb commands for per-RX control and multicast compliance
    • Updated commandallrx.sh to use telnet sessions and local device IPs
    • Updated GET and POST commands to reduce subshell spawning
  • [AES67] Updated EDID for 2/8-channel, 48/96K audio formats (requires reboot)

Known Issues

Key: [impact level][feature affected][affected version] Description

  • [All Devices][Audio][MAX v4.1.0] Disabling audio services causes devices to not boot correctly and breaks access to the API and webUI
    • Symptoms:
      • webUI gets stuck on the spinning blocks logo and will not load further
      • channel commands do not work, and cause the telnet session to lock up when sent
      • getmodel.sh does not work, and causes the telnet session to lock up when sent
      • Audio does not work. However, this will often happen on systems where the user EXPECTS audio to not work so they will not necessarily report it as a symptom
      • The astparam dump will show no_i2s=y
    • Workarounds:
      1. Enable audio services via telnet with the command astparam s no_i2s;astparam save;sleep 1;reboot
      2. Back-date firmware to B2.3.9 if you need audio services disabled
  • [IR][MAX v4.0.0] Global Cache and Global Cache Compressed formatted IR commands do not work
    • Use Pronto formatted IR commands

MAX v4.1.1

Release Date: 2024-06-28

MAX v4.1.0

Release Date: 2024-06-05

MAX v4.0.0

Release Date: 2024-03-12

close button
scroll to top icon