You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Thanksgiving: Support will not be available Thursday November 28th through Sunday December 1st. We will re-open Monday December 2nd.
Home > System Design & Planning > Product Information > MaxColor > [MaxColor] Power Supply Specifications
[MaxColor] Power Supply Specifications
print icon

All devices in the MaxColor system are POE - power is provided by a POE switch.

If a power supply is needed, devices in the MaxColor system use the same format of power supply:

  • 4.7 to 18 Volts
  • 5.5mm outside, 2.1mm inside barrel connector
  • positive tip
  • Enough Amps to produce 10 Watts - calculated by using Watts = Volts x Amps

Power supplies with these specifications can be found at any electronics retailer that sells power supplies.

Example Power Supply: https://www.digikey.com/product-detail/en/phihong-usa/AA10A-050A-R/993-AA10A-050A-R-ND/11203820

Power plug

scroll to top icon