You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Thanksgiving: Support will not be available Thursday November 28th through Sunday December 1st. We will re-open Monday December 2nd.
Home > Configuration Software > Advanced Matrix Programmer (AMP) > AMP Videos > [AMP] [Standardized] [Video] Add a Device to a System while On-Site
[AMP] [Standardized] [Video] Add a Device to a System while On-Site
print icon

Overview

AMP - Advanced Matrix Programmer - is a software that configures 3G and MaxColor Just Add Power devices into an HDMI matrix switching system.

This video demonstrates adding a device to a Standardized Configuration while On-Site. Add Device expects that the switch already has an open port previously configured for an expansion device, and only the device itself needs to be configured. Connect the new device to any data network port on the network for Add Device On-Site to find it properly.

Work on a Standardized Configuration system by clicking Let's Go! on the main screen.


Video

Watch on YouTube.

scroll to top icon