You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Support will close at 3:00 pm Eastern on December 20th. Limited support will be available from 8:00 am to 6:00 pm on December 23rd, 26th, 27th, and 30th. Support will be closed December 24th, 25th, and 31st as well as New Year's Day.

Happy Holidays!

Showing articles from Web UI tag

[2G Hybrid] Access the Device webUI

Overview This article will cover how to access a Just Add Power device's webUI, which allows the user to monitor live information, execute firmware updates, and manage device settings. These instructions will provide two options on accessing the Just Add Power device: * Connected to a Local Data Network or PC …

Set Web Name

Devices on firmware A5.21d and later have the ability to apply a name to the web interface to distinguish it from other Just Add Power devices in a system. Setup * Log into the web interface of the device and go to the System --> Utilities bar * Alternatively, telnet into the device * Apply the command below, …

[2G Hybrid] Device Management

The PDF attached to this Knowledge Base article provides information on the web interface of Just Add Power 2G devices. Many features of the Just Add Power 2G system can be configured from the web interface: * Check Firmware * Change IP Address * Reboot * Factory Default * Change EDID * USB * RS232

scroll to top icon