[2G Hybrid] Firmware Update on Single Device
Overview In order for a 2G Hybrid device to function with other devices in the system, their firmware version must match. Below will cover how to gather the information needed to begin, and the steps required to perform a firmware update. Check Firmware Version It's important to gather the 2G system's firmware …
16-Dec-2024
[2G Hybrid] Access the Device webUI
Overview This article will cover how to access a Just Add Power device's webUI, which allows the user to monitor live information, execute firmware updates, and manage device settings. These instructions will provide two options on accessing the Just Add Power device: * Connected to a Local Data Network or PC …
16-Dec-2024
[2G Hybrid] Identify Device Model
Overview There are many ways to identify the model/SKU number of a Just Add Power transmitter or receiver. These instructions will cover two ways to find this information: * Command Line Interface [CLI] * Physical Identification Command Line Interface [CLI] This function is only supported on Firmware A6.4.12 a…
25-Jul-2024
[2G Hybrid] Check Firmware Version
Overview Knowing how to check the firmware version of your Just Add Power devices is required when planning to add or replace a device on an already established system. In order to perform most of these steps, you will need a static route active. Follow the link for Instructions on how to set one up on your netwo…
06-Aug-2024
